 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| OXPCIE952, PCI Express to Dual Serial and Parallel Port Highlights General Features o Dual UART or single UART plus IEEE1284 parallel port configurations o PCIe x1 end-point - Integrated 2.5 GT/s SerDes o 11 x 11mm2, 120-pin TFBGA package o Typical Power: 200 mWatts Part of the Expresso family of high performance PCI Express devices, the OXPCIE952 is a single chip dual serial and parallel port device in a range of 2, 4 & 8 port solutions, that includes the OXPCIe954 & OXPCIe958. Incorporating PLX Technology's ultra high performance Oxford 950 UART technology, the device combines outstanding system performance with unrivalled flexibility for even the most demanding of serial applications. Complete with the Oxide development tools and certified device drivers, the OXPCIE952 is easy to design-in and the ideal connectivity solution for a diverse range of products including: PC Add-on Cards, Industrial PC, Point of Sale Terminals, Industrial Control, Building Automation and Network Management. Accelerate your product development and time to market with Oxide and PLX Technology's easy to design-in, high performance serial connectivity solutions that just work. Key Features o Standards Compliant - PCI Express Base Specification, r1.1 (backwards compatible with PCIe r1.0a) - PCI Power Management Spec, r1.2 - ExpressCard, Mini Card & AIC compatible - MSI/MSI-X compatible - ASPM (L0S, L1) Link power management o High Performance - PLX's Oxford 950 UART - DMA/bus mastering of both UARTs - Asynchronous baud rates up to 15 Mbps - 128-byte deep transmit/receive FIFO - 9, 8, 7, 6 & 5-bit data framing - Automated in & out-of-band flow control - Advanced FIFO fill management - IEEE1284, SPP/EPP/ECP compliant parallel port o Flexibility - RS232, RS422, RS485 and IrDA operation - Flexible clock pre-scaler from 1 to 31.875 - Programmable RS485 Turn-around delay - 450 through 950 software compatibility - 8 user-configurable GPIOs/PWMs - Device parameters configurable via EEPROM - 1.8V, 2.5V or 3.3V UART & GPIO I/O voltage o Robust Operation - Operation from a single 3.3 V supply - Industrial temperature range -40C to 85C o Broad Device Driver Support - Windows Vista/XP/2K - WinCE 4.2/5.0/6.0 - Linux 2.4/2.6 (c) PLX Technology, www.plxtech.com Page 1 of 2 4/29/2009, Version 1.00 OXPCIE952, PCI Express to Dual Serial and Parallel Port Outstanding Performance The OXPCIE952 achieves ultra high performance by combining the class leading 15Mbps asynchronous data rates and deep FIFOs of PLX's Oxford 950 UART, with advanced MSI interrupt handling and bus master DMA for maximum throughput, minimum CPU overhead and optimal system performance. Configurable as two serial ports or one serial and one parallel port the OXPCIE952 includes a host of advanced features such as, automated in-band flow control, readable FIFO levels and RS485 turnaround delay, that provides further scope to fine tune performance, while its flexible clock pre-scaler provides for a wide range of baud rates. With comprehensive power management and industrial temperature range as standard, the OXPCIE952 is perfect for power and temperature sensitive ExpressCard and MiniCard designs and is the choice for high performance systems. To support these advanced features the OXPCIE952 is backed by a dedicated PLX device driver that is quality assured, exhaustively tested and WHQL approved; saving development time and providing peace of mind. Design and evaluation of the OXPCIE952 couldn't be easier with this comprehensive reference design kit (RDK). The RDK includes everything you need for PC installation and evaluation including Hardware, Oxide Development Tools and software device drivers. Simply plug the half length PCI Express evaluation board into any PCI Express slot, install the software and its ready to go. Development Support Changing the dynamics of device customization, Oxide development tools enable customization of the OXPCIE952 in minutes. No more complex, time consuming, error prone manual editing of programming files and driver source code; Oxide's intuitive graphical user interface provides simple `point and click' feature selection and text box entry for fast, error free customization with minimal software expertise as well as instant access to up to date documentation, software and reference designs. Check the PLX website for details. Ordering Information Part Number OXPCIE952-FBAG EK-OXPCIE952 Description Dual Serial & Parallel Port Bridge Reference Design Kit OXPCIE952 (c) PLX Technology, www.plxtech.com Page 2 of 2 4/29/2009, Version 1.00 |
Price & Availability of OXPCIE952
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |